1, Preparation before construction
1.1. Check the construction site to ensure that there are no flammable materials or open flames present, and keep the construction site clean and dry.
1.2. Based on construction requirements and on-site conditions, develop a reasonable construction plan and prepare the necessary tools and materials.
1.3. Construction personnel should undergo professional training, be familiar with the performance and construction process of ceramic fiber cotton, and comply with relevant safety regulations.
2, Construction steps
2.1. Laying bottom plate: Lay a layer of bottom plate on the surface that needs insulation. The bottom plate can be made of materials such as wooden boards, plastic boards, or metal boards to ensure that the bottom plate is flat, clean, and dry.
2.2. Stir ceramic fiber foam: Put the ceramic fiber foam into a mixer, add an appropriate amount of water, stir well, and then use it. Note that the stirred ceramic fiber cotton should be used up within the specified time to avoid drying and clumping.
2.3. Applying ceramic fiber foam: Apply the stirred ceramic fiber foam onto the bottom plate, paying attention to evenly applying it to avoid voids and cracks. The thickness of the applied aluminum silicate loose cotton should meet the design requirements, generally 2-3 centimeters.
2.4. Compact ceramic fiber cotton: Apply compaction treatment on the surface of the coated ceramic fiber cotton to eliminate air and increase density. During the compaction process, attention should be paid to uniform force to avoid damaging the bottom plate.
2.5. Fixed ceramic fiber foam: Fix the surface of the coated ceramic fiber foam using materials such as steel wire mesh, iron wire mesh, or plastic mesh. When fixing, attention should be paid to even force to avoid damaging the ceramic fiber cotton.
2. 6. Plastering treatment: Plastering treatment can be carried out on the fixed surface of ceramic fiber cotton. Materials such as cement and gypsum can be used for plastering to increase aesthetics and waterproof performance. When plastering, it should be flat and smooth, without cracks or voids.
7. Maintenance: After completing the plastering treatment, the ceramic fiber cotton should be cured. During the maintenance period, attention should be paid to maintaining dryness, good ventilation, and avoiding direct sunlight and rainwater erosion. The maintenance time is generally 7-14 days, and the specific time depends on the actual situation.
3, Precautions
3.1. ceramic fiber cotton should be stored in a dry and well ventilated place, avoiding direct sunlight and rainwater erosion.
3.2 During the construction process, attention should be paid to safety and the presence of open flames and flammable materials should be avoided. If you have any questions, please consult professionals in a timely manner.
3.3 During the construction process, relevant environmental regulations should be followed to avoid any impact on the environment.