Ceramic fireproof board is a building material with high strength and fire resistance, which is widely used in industries with high requirements for fire resistance. In order to ensure that the performance of ceramic laminates is not affected by external factors, the correct storage method is crucial. Here are some key considerations for storing ceramic laminate:
1. Environmental control:
The environment in which ceramic fireproof boards are stored should be kept dry, water-free, and non-humid. Avoid storing in rainy days and ensure a dry indoor environment. If it is in the rainy season, it should be covered with a waterproof canvas and pay attention to water seepage on the walls, especially in the tin room, to prevent water leakage.
2. Avoid direct contact with the ground:
When storing, the ceramic fireproof board should be isolated from the ground using a tray and stored at least 20 mm above the ground. This is because the ceramic fiberboard uses a waterproof plastic film on the inside and a cardboard box on the outside, which may cause the board to get wet in direct contact with the ground.
3. Anti-corrosion treatment:
For wood fireproof boards such as flame retardant boards, anti-corrosion treatment should be carried out.
Eco-friendly flame retardant plywood preservatives are used to ensure that the mechanical strength and degree of use of the wood are not affected.
4. Temperature and humidity:
The temperature of the storage area should not be lower than 18°C, and the relative humidity should not be lower than 50%. This helps to maintain the stability and fire resistance of the plate.
5. Avoid impact and friction:
In the process of handling and storage, impact and friction should be avoided to prevent damage to the protective film on the surface of the plate and affect the service life.
6. Cleaning & Maintenance:
Clean the surface of the laminate regularly, using mild soap or detergent and a mild stiff brush with a household neutral detergent. For stubborn stains, you can use paste-like baking soda and water to wipe lightly, but avoid hard objects or corrosive chemicals that can damage the surface.
7. Professional Installation:
When installing the ceramic fireproof board, it should be ensured that the wall surface is flat and clean, and the special glue or adhesive should be evenly applied around and around the edge of the board to ensure the firmness and flatness of the board.
Following the above storage guidelines can help maintain the performance and longevity of ceramic laminates to ensure that they perform their due fire protection at critical times.