1, Refrigeration appliances------Including household refrigerators, beverage dispensers, etc.
● Thermal insulation and cold insulation layer of refrigerator and cold drink machine shell: 10mm nano gas gel composite thermal insulation plate, or 10mm VIP vacuum thermal insulation plate, not only thermal insulation and cold insulation, but also noise reduction.
Energy saving: Energy saving of 10% -30%. Compared to other insulation materials, it saves about 0.1 degrees of electricity per day.
● Space saving: Increase effective volume by 20% -30%. After using the LH-864 nanocomposite insulation board, the cold insulation is guaranteed, the cold insulation wall is thinner, and space is saved more. Compared to the housing price of tens of thousands of yuan per square meter, space saving is the key.
● Fire safety: Composite insulation panels can withstand temperatures up to 1000 ℃.
Although the price of nano aerogel composite thermal insulation board is still high, the electricity cost saved by users after using the refrigerator for 7 to 10 years is equivalent to the increased cost of using nano aerogel composite thermal insulation board to insulate the refrigerator. The use of nano aerogel plate for heat insulation, in addition to economic significance, has the advantages of light weight and small size of the refrigerator. The upper door of refrigerator door and freezer shall be light in weight and thin in wall. It is of great technical and economic significance to use aerogel composite insulation board for heat insulation.
2, Air conditioning------Including room air conditioners, electric fans, ventilation fans, hot and cold air heaters, air dehumidifiers, etc.
Air conditioning compressor insulation cotton: wrapped with a layer of insulation cotton to protect the compressor and effectively reduce noise. The insulation cotton used in air conditioning mainly plays a role in noise reduction, absorbing and damping the noise emitted by the compressor during operation. At the same time, it can provide insulation in winter and reduce noise. For air conditioners above 3P, an electric heating wire is installed at the compressed root to prevent heating during low temperatures in winter when compression cannot be started.
● Central air conditioning duct: Using aluminum foil ceramic fiber blanket (tested according to GB8624-2012, it can meet the national A1 level flame retardant standard) or aluminum foil glass wool felt for insulation and sound insulation. Due to the general service life of household central air conditioning units being 15-20 years, and the service life of ceramic fiber blankets covered with aluminum foil being around 20 years, which is consistent with the unit, it can ensure that insulation and sound insulation materials are not replaced during the service life of the central air conditioning unit.
3, Cleaning electrical appliances-----Including washing machines, dryers, electric irons, vacuum cleaners, floor waxing machines, etc.
Electric iron and electric hair dryer: 6mm ceramic fiber blanket or ceramic fiber paper insulation gasket is used internally.
4, Kitchen appliances-----including electric stoves, microwaves, induction cookers, electric ovens, rice cookers, dishwashers, electric water heaters, food processing machines, etc.
Electric stoves, gas stoves, microwave ovens, induction cookers, electric ovens, rice cookers, and electric water heaters: The internal insulation layer is insulated with ceramic fiber boards or ceramic fiber blankets, usually 10-20mm thick to meet the requirements.
5, Audiovisual appliances-----Including micro projectors, televisions, radios, recorders, video recorders, cameras, combination speakers, and mobile phones.
Electrical insulation protection: Electrical appliances can generate heat when used for a long time. Use 1mm ceramic fiber paper as an insulation pad to protect internal electronic components.
Application advantages of electrical insulation pads: After using insulation pads, the performance of electrical appliances is improved and their service life is extended.
6, Other electrical appliances-----Such as electronic cigarettes.
● Replacement of electronic smoke insulation pad: the internal temperature is about 400 ℃. After the original 8mm ceramic fiber blanket was used for insulation, the cold surface was 45 ℃. After the 5mm thick nano aerogel insulation blanket was used for insulation, the electronic smoke surface was not hot, and the cold surface temperature was controlled below 40 ℃.
● Advantages of using aerogel composite thermal insulation blanket instead of electronic cigarette thermal insulation pad: using nano aerogel gel thermal insulation blanket reduces the insulation thickness, makes electronic cigarette more realistic, improves the grip, makes electronic cigarette more slender and beautiful, and increases sales volume.