Ceramic fiber module is a type of insulation material commonly used for lining kiln walls and insulation of high-temperature thermal equipment. In order to fully play its role, in addition to the high quality of its own materials, it is also required to be installed in place.
This material is fixed with aluminum fasteners, and the corrugated ceramic fiber module is fixed with brackets and drill tail screws, and then sealed with glue. The position is generally set in the middle of the span. The connection between the product and the drill tail screw should have a cover plate because its cold and hot deformation is relatively large, which is easy to be cut by self tapping screws. Therefore, the sunlight board should have a relatively large hole where the self tapping screws are inserted. When installing lighting panels, the flexibility of the panels should be considered to better serve their intended purpose.
In addition, there is no need for overlapping within 12m, and overlapping is required for exceeding 12m. The overlap length is 200-400 millimeters. Apply two layers of sealant at the overlap, and there is no need for edging at the horizontal overlap. The overlap of the longitudinal ceramic fiber module is generally fixed with self tapping screws and coated with sealant, while the bite plate needs to be ground. At the same time, the vertical overlap is set near the sandalwood strips, and the service life of the product will also be relatively extended.
Therefore, there are many things to pay attention to when fixing ceramic fiber modules. During construction, construction personnel must pay attention to details and be aware that their fixing methods are not sufficient. Appropriate skill adjustments should be made according to the actual situation to fully utilize the function of this product.